Celerity fc-41el adapter, Hardware specifications, Advanced fc capabilities – ATTO Technology FC-44ES EN User Manual
Page 7: Host bus specifications, Environmental & physical specifications, External connectivity, Software specifications
4
Celerity FC-41EL Adapter
The Celerity FC-41EL is a single-channel host
adapter. With 4-Gb FC speeds of up to 800 MB/sec.,
the FC-41EL supports the most demanding application
requirements.
The FC-41EL takes advantage of the latest in host
interconnect technology, PCI Express, a serial, high-
speed connection that supports aggregate throughout
up to 2 GB/sec.full-duplex. The FC-41EL is software
compatible with existing PCI and PCI-X products
using the same device drivers as other Celerity FC
family products, simplifying user installation and
support. It is backward compatible with existing 2-Gb
and 1-Gb FC infrastructures, protecting existing
technology investments.
Hardware specifications
• 1 Fibre Channel port
• 4-Gigabit data transfer rate
• 800 MB/sec. maximum full-duplex throughput
• Supports all FC topologies: direct fabric,
arbitrated loop and point-to-point
• ANSI Fibre Channel: FC-PH, FC-FCP, FC-AL,
FC-AL2, FC-PLDA, FC-FLA
• Flash ROM for easy field upgrades
• FC Class 3 support
• Local management and diagnostics
• Buffer
credits:
4
Advanced FC capabilities
• Supports SNIA HBA API
• On-demand automatic negotiation between 4-
Gb, 2-Gb and 1-Gb Fibre Channel
• Supports initiator and target modes
• Supports Windows® FDMI and WMI
• Supports exclusive ATTO Advanced Data
Streaming (ADS™) technology
Host bus specifications
• x4 mechanical and x4 electrical PCIExpress
interconnect
• Conforms to PCI Express Base Spec 1.0a
• Conforms to PCI Express CEM Spec 1.0a
Environmental & physical specifications
• Conforms to PCIe low profile form factor
specifications
• Operating temperature: 0 to 45º C (32-113º F)
• Storage temperature: -40 to 70ºC (-40 to 158º F)
• Relative humidity: 10 to 90% non-condensing
• 100 lf/m (minimum) airflow recommended
• Conforms to PCI Express low-profile form-factor
specification
• 12V @ 0.5A (max)
• Length: 5.600 inches
• Height: 2.712 inches
• RoHS
compliant
External connectivity
• Easy-to-install full and low-profile connection
plates
• External LEDs for on-line and speed status
• A pluggable optical LC SFP transceiver included
Software specifications
• Windows XP, 2000, Server 2003 and Vista
• Mac OS X (10.4.x, 10.5.x)