MoJack ZR - Manual (Page 4)

MoJack ZR Lift MoJack ZR Lift
6 7
Insert the Crank Handle into the drive socket.
The square end of the Crank Handle is
tapered to make cranking more comfortable.
If the Crank Handle wobbles a little during use,
this is normal.
Assemble the Wheel Pad into the square
tube on the top of the Scissor Frame and
install Push Pins . Repeat with second
Wheel Pad.
Assembly Instructions
STEP 1
Remove MoJack ZR from package.
Inventory items to be certain all parts and hardware
are present. If any parts or hardware are missing,
please contact MoJack at 1-877-575-3173 or
email us at [email protected].
Scissor Frame 1
2
1
Wheel Pad 2
Operating Instructions
STEP 2
5
Push Pin 5
STEP 3
3
3
Crank Handle 3
Drive Socket
THIS COMPLETES ASSEMBLY.
Before using the MoJack ZR, carefully read this manual in its entirety.
The Operating Instructions will show how
to operate the MoJack ZR and show how to
prepare the MoJack ZR for storage.
STEP 1
Familiarize Yourself with the MoJack ZR
• Practice raising and lowering the MoJack ZR
before attempting to lift a mower (see Steps 5-8
on how to raise and lower a mower).
• Practice Step 10 if you intend to raise or lower
the mower with a drill attachment.
NOTE: Locking bar must be raised before lowering.