4 pcipnp, Hyper transport frequency[4x, Amd cool’n’quiet function[disabled – Asus M2N4-SLI User Manual
Page 82: Amd live! function [disabled, Plug & play o/s[no, Primary display adapter[pci
ASUS M2N4-SLI
4-25
Trfc[Auto]
Configuration options: [Auto] [0] [1] [2] [3]
DQS Signal Timing Training Control[Perform DQS]
Configuration Options: [Skip DQS] [Perform DQS]
Hyper Transport Frequency[4x]
Configuration options: [1x] [2x] [3x] [4x] [5x]
AMD Cool’n’Quiet Function[Disabled]
Enables or disables the AMD Cool’n’Quiet function.
Configuration options: [Auto] [Disabled]
AMD Live! Function [Disabled]
Enable or disables AMD Live! technology.
Configuration options: [Disabled] [Enabled]
F1:Help ↑↓ : Select Item
-/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu
Enter: Select Sub-menu
F10: Save and Exit
PCIPnP
Plug & Play O/S
[
No
]
Primary Display Adapter
[PCI]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
4.4.4 PCIPnP
Plug & Play O/S[No]
When set to [No], the BIOS configures all the devices in the system.
When set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for
boot.Configuration options: [No] [Yes]
Primary Display Adapter[PCI]
Allows selection of graphics controller to use as the primary boot device.
Configuration options: [PCI] [PCI-E]
Select Menu
Item Specific Help
Enable or Disable LAN
cable check during POST.