Lincoln Electric IMT10016 POWER MIG 216 - Manual (Page 9)

A-1 A-1 INSTALLATION
Input Ampere Power Cord
Input Voltage/ Fuse or Breaker Rating On
Frequency (Hz) Size (Super Lag) Nameplate
(30% Duty Cycle)
208/60 50 40A 50 Amp, 250V
230/60 50 36A Three Prong Plug
220/50 50 37A (NEMA) Type 6-50P)
TECHNICAL SPECIFICATIONS – POWER MIG® 216
INPUT – SINGLE PHASE ONLY
RATED OUTPUT
OUTPUT
RECOMMENDED INPUT WIRE AND FUSE SIZES
Height Width Depth Weight
With Coil Claw™ Without Coil Claw™ With Gun and Cable Without Gun and Cable
and Work Cable and Work Cable
32.56 in. 20.12 in. 19.15 in. 39.92 in. 215.5 Ibs. 206.5 lbs.
827 mm 512 mm 487 mm 1014 mm 97.8 kg. 93.7 kg.
PHYSICAL DIMENSIONS
Wire Speed 50 – 700 IPM (1.27 – 17.8 m/minute)
WIRE SPEED RANGE
Standard Voltage/Phase/Frequency Input Current @ 170 Amp Rated Output Input Current @ 216 Amp Rated Output
208/230/1/60 Hz 33/29 Amps 40/36 Amps
220/1/50 Hz 30 Amps 37 Amps
Duty Cycle Amps Volts at Rated Amperes
30% 216 Amps 22 Volts
40% 190 Amps 23 Volts
60% 170 Amps 24 * Volts
Welding Current Range Maximum Open Circuit Voltage Welding Voltage Range
30 – 250Amps 36 Volts 13-24 Volts
POWER MIG® 216
TEMPERATURE RANGES
STORAGE TEMPERATURE RANGE
-40°F to 185°F(-40°C to +40°C)
OPERATING TEMPERATURE RANGE
-4°F to 104°F(-20°C to +40°C)
*
23 Volts at 50 Hz.
OPERA
T
OR
ʼS
MANUAL