ALK Technologies Pocket PC 6 - Manual (Page 32)

- 30 -
Reference: Screens & Buttons in
Guidance Mode on Your Pocket PC
The following is a summary guide to the screens and buttons you will see on your
Pocket PC as you operate CoPilot in Guidance Mode.
Home Screen
Going To Screen
This screen displays a scrollable list of
all stops in the current trip, numbered in
the order CoPilot will route to them.
Tap and hold the stylus on a stop to
open a menu that lets you delete the
stop, zoom to it on the map, move it up
or down on the list, or make it a way-
point (an unreported stop that guides
your route along preferred roads). You
can also optimize the stop order for a
more efficient route using this menu.
Tap Add Stop to enter another stop in
the Going To screen, New Trip to delete
all stops and start a new trip, or Start
Driving to receive guidance.
The Home screen appears when you first
open CoPilot. If you don’t want to see
it at startup, uncheck Show this screen
at startup. This screen can be accessed
from the Menu at any time. Home screen
options are:
Going To to enter a destination and
receive guidance
Start Demo to start a product demo
for first-time users
Help topics about basics such as trip
entry, hardware setup, and options
Options to change CoPilot routing,
guidance, and map options
Live Setup for live communications
GPS to set up your GPS and for GPS
information
Tap Turn Receiving Off once if you want to turn
GPS receiving off. Tap again to turn it back on.
When receiving is off, CoPilot will be unable to
provide driving instructions.
Turn Receiving On/Off
1. CoPilot automatically
creates .gps track files as
you drive, and stores them
at the end of each trip.
To open a GPS track, select
Open GPS Track to open
a Windows folder of your
stored .gps files. 2. To access a track, tap
once on the file you want
to select. 3. Now select Play
Track and set the Track
Playback Speed to start
track playback. You can
come back to this screen
to Pause/Play a GPS
track once it starts.
Track Playback