Lincoln Electric IM10159 X-TRACTOR 3A - Manual (Page 9)

GENERAL DESCRIPTION
The X-Tractor 3A is a self-contained, high vacuum system for the
removal and filtration of welding fume particles and other point
source particulate. It is designed to supply suction for six fume guns
or small suction heads and is suitable for heavy duty welding appli-
cations and continuous use.
Welding fume enters the X-Tractor 3A through a connection on the
rear side of the machine. It then passes through the filter, the blower
and exits through an internal silencer. The blower is powered by a
three phase electric motor. A special direct cooling system assists in
cooling the blower.
The vacuum level depends upon the amount of airflow through the
blower. Therefore, extraction performance will vary depending on the
number and type of extraction devices in use.
The X-Tractor 3A features an integrated automatic filter cleaning
system. A timer signals a pulse of compressed air that shakes the
particulate from the outside surface of the filter so that it falls into the
dustbin. This air jet is released from an on-board tank of compressed
air that is pressurized from an external source through a fitting on the
front of the machine.
Unit includes:
• Filter Cartridge
• Automatic Filter Cleaning System
• Automatic Operation Connection
TECHNICAL
SPECIFICATIONS
NOTE: Technical specifications are subject to change without prior notice.
Specifications and guarantees are valid only when specified
replacement parts and filters are used.
9
INSTALLATION X-TRACTOR ® 3A WELDING FUME EXTRACTOR
GENERAL
MOTOR SPEED 3600 RPM
POWER 3.5 HP (2.6 KW)
INPUT VOLTAGE 230V, 3Ph, 60 Hz
460V, 3Ph, 60 Hz
CURRENT DRAW 230V - 8.1A
460V - 4.1A
CABLE DIAMETER 3 X 1.5 + E MM 2
INLET / OUTLET DIAMETER 2.99 INCHES (76 MM)
NET WEIGHT 192 LBS.
NOISE LEVEL <67 DB(A)
RECOMMENDED
COMPRESSED AIR
58 PSI (4 BAR)
INPUT COMPRESSED AIR 1/4” DIM.
FILTER MATERIAL POLYESTER
FILTER AREA 30.1 FT 2
FILTER CLASS C BIA
FILTRATION EFFICIENCY
(ZH1/487-2)
>99.9%
FAN
TYPE VACUUM PUMP
AIRFLOW (MAX.) 300 M 3 /H
STATIC PRESSURE (MAX.) 21000 PA
FAN SPEED 3600 RPM