Asus 1U Rackmount Chassis Kit R10-A2P4 - Manual (Page 21)

2-9 ASUS R10-A2P4 1U rackmount chassis kit
2.4 Hard disk drives
To install a SATA HDD:
1. Release a drive tray by pushing
the spring lock to the right, then
pulling the tray lever outward. The
drive tray ejects slightly after you
pull out the lever.
2. Firmly hold the tray lever and pull
the drive tray out of the bay.
3. Take note of the drive tray holes.
Each side has three holes to fit
different types of hard disk drives.
Use two screws on each side to
secure the hard disk drive.
4. Place a SATA hard disk drive on
the tray, then secure it with four
screws.