Asus 1U Rackmount Chassis Kit R10-A2P4 - Manual (Page 15)

2-3 ASUS R10-A2P4 1U rackmount chassis kit
2.2 Removing and installing the chassis cover
2.2.1 Removing the cover
1. Use a Phillips screwdriver to remove the screw on each front end of
the top cover.
3. Firmly hold the cover and slide it
toward the rear panel for about
half an inch until it is disengaged
from the chassis.
4. Lift the cover from the chassis.
2. Loosen the two thumbscrews on
the rear panel to release the top
cover from the chassis.
1/2 inch distance
Thumbscrews