AT&T 585-350-812 - Manual (Page 107)

A-7
2. Evaluate
If event_ret != “‘C’”
3. Goto Event_start
End Evaluate
#
# Send data to the host. Only connected agent, ANI, DNIS, and
# VIS data are used in this example application.
#
# It is assumed that Aid Key for sending the data to the host is
# PF3. Note that you have to investigate what Aid Key is
# appropriate for your host environment.
#
8. Send Host Screen
Send Screen Name: connect_data Use Aid Key: PF3
Field: connect_number = connect_num
Field: ani = calling_num
Field: dnis = called_num
voice_data = vis_data
9. Get Host Screen
For Screen Name: verify
End Get Host Screen
10. Send Host Screen
Send Screen Name: verify Use Aid Key: PF3
11. Get Host Screen
For Screen Name: connect_data
End Get Host Screen
#
# Repeat the process - go back and get the next event.
#
12. Goto Event_start
HOST_DOWN:
13. Goto start