Nilfisk-ALTO 106269015 - Manual (Page 20)

18
NEPTUNE PE/DE
Original Instructions
9 Further information
9.1 Recycling the machine Make the old cleaner unusable
immediately.
1. Unplug the cleaner and cut
the power cord.
The pressure washer contains
valuable materials that should
be recycled.
Contact your local waste dispo-
sal site. If you have any queries,
please contact your local autho-
rities or your nearest dealer.
9.2 Warranty Your Nilfisk-ALTO product is
guaranteed for 12 months from
date of purchase (purchase re-
ceipt must be presented) on the
following conditions:
• that defects are attributable
to fl aws or defects in materi-
als or workmanship. (Usual
wear and tear as well as mis-
use are not covered by the
guarantee).
• that repairs have not been
carried out or attempted
by other than Nilfi sk-ALTO-
trained service staff.
• that only original accessories
have been applied.
• that the product has not been
exposed to abuse such as
knocks, bumps or frost.
• that the instructions in the
manual have been carefully
observed.
A warranty repair comprises the
replacement of defective parts,
but it does not cover freight and
packaging charges. Besides we
refer to national Sale of Goods
Act.
Any illegitimate guarantee
repair will be invoiced. (I.e.
malfunctions due to causes
mentioned in section “7 Trouble
shooting” of the instruction
manual).
9.3 CE Declaration of Conformity
CE Declaration of Conformity
Product: High Pressure Washer
Type: NEPTUNE PE/DE
The design of the unit corresponds to the following perti-
nent regulations: EC Machine Directive 2006/42/EC
EC Low-voltage Directive 2006/95/EC
EC EMC Directive 2004/108/EC
RoHS Directive 2011/65/EC
Applied harmonised standards: EN 12100-1 (2004), EN 12100-2 (2004),
EN 55014-1 (2006), EN 55014-2 (2001)
Applied international standards and technical specifi ca-
tions: IEC 60335-2-79 (2007)
Name and address of the person authorised to compile the
technical fi le: Anton Sørensen
General Manager, Technical Operations EAPC
Nilfi sk-ALTO
Division of Nilfi sk-Advance A/S
Industrivej 1
DK-9560 Hadsund
Identity and signature of the person empowered to draw up
the declaration on behalf of the manufacturer:
Anton Sørensen
General Manager, Technical Operations EAPC
Nilfi sk-ALTO
Division of Nilfi sk-Advance A/S
Industrivej 1
DK-9560 Hadsund
Place and date of the declaration: Hadsund, 15.04.2013