IEI Integration IOVU-752S - Manual (Page 16)

IOVU-752S Panel PC
Page 9
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the IOVU-752S and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IOVU-752S. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the IOVU-752S or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the IOVU-752S, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
IOVU-752S.
2.2 Unpacking Precautions
When the IOVU-752S is unpacked, please do the following:
ƒ Follow the anti-static precautions outlined in Section 2.1.
ƒ Make sure the packing box is facing upwards so the IOVU-752S does not fall
out of the box.
ƒ Make sure all the components shown in Section 2.3 are present.