IEI Integration AFL-07A 08AH 10A 12A-LX Series - Manual (Page 104)

AFOLUX LX Series Flat Panel PC
Page 90
The IRQ Resources menu has the following options:
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
The above options all have the following default options.
PCI Device (Default) The IRQ is assigned to legacy ISA for devices compliant
with the original PC AT bus specification, PCI/ISA PNP for
devices compliant with the Plug and Play standard
whether designed for PCI or ISA bus architecture.
Reserved The IRQ is reserved by BIOS.
x Memory Resources [Press Enter]
The Memory Resources menu can only be accessed if the Resources Controlled By
option is set to Manual. Use Memory Resources to select a base address and the length
for the memory area used by a peripheral that requires high memory.
The menu has two configurable options:
Reserved Memory Base
Reserved Memory Length
PCI/VGA Palette Snoop [Disabled]
Use the PCI/VGA Palette Snoop option to enable the system to determine whether or not
some special VGA cards, high-end hardware MPEG decoders and other similar devices
are allowed to look at the VGA palette on the video card so these devices can determine
what colors are in use. This option is needed very rarely and should be left "Disabled"
unless a video device specifically requires the setting to be enabled upon installation.
Disabled (Default) Does not allow the graphics devices to examine the VGA