IEI Integration S12A v3.00 - Manual (Page 41)

SAILORPC-12A Panel PC
Page 31
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector. Step 0:
3.8 Power Connection
The power supply connects to the SAILORPC-12A with an M12 connector.
Step 1: Connect the M12 connector to the SAILORPC-12A.
Step 2: Connect the power plug end to the main power. S te p 0 :
3.9 Driver Installation
NOTE:
The contents of the CD may vary throughout the life cycle of the
product and is subject to change without prior notice. Visit the IEI
website or contact technical support for the latest updates.
The following drivers can be installed on the system. Each driver is in its own directory on
the driver CD:
ƒ Chipset driver
ƒ Graphics driver
ƒ LAN driver
ƒ Audio driver
ƒ Touch panel driver
ƒ Keypad utility driver
ƒ Wireless LAN card driver