IEI Integration S12A v3.00 - Manual (Page 39)

SAILORPC-12A Panel PC
Page 29
Figure 3-18: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 port. Step 0:
3.7.3 Serial Device Cable
The serial device connectors are for connecting serial devices. Follow the steps below to
connect a serial device to the panel PC.
Step 1: Locate the DB-9 connector . The location of the DB-9 connector is shown in
Chapter 2 .
Step 2: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See Figure 3-19.