IEI Integration WAFER-CV-D25502_N26002 - Manual (Page 104)

WAFER-CV-D25502/N26002 3.5" Motherboard
Page 89
On D EFAULT Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.
Off Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.
Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.
Disabled Normal POST messages displayed
Enabled D EFAULT OEM Logo displayed instead of POST messages
Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.
Disabled D EFAULT Ignore all PXE Option ROMs
Enabled Load PXE Option ROMs.
Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.
Force
BIOS
D EFAULT Sets display mode to force BIOS.
Keep
Current
Sets display mode to current.