IEI Integration NANO-9453 v1.12 - Manual (Page 182)

NANO-9453 EPIC Motherboard
Page 164
Boots Graphics Adapter [IGD]
Use the Boots Graphics Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
IGD D EFAULT
PCI/IGD
Internal Graphics Mode Select [Enable, 8MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Disable
Enable, 1MB 1MB of memory used by internal graphics device
Enable, 8MB D EFAULT 8MB of memory used by internal graphics device
6.7.1.1 Video Function Configuration
Use the Video Function Configuration menu to configure the video device connected to
the system.