4 cf card installation – IEI Integration NANO-9453 v1.10 User Manual

Page 105

NANO-9453 EPIC Motherboard

Page 85

Step 4:

Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket

out and push the rear of the SO-DIMM down. (See Figure 5-6)

Step 5:

Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into

place and secure the SO-DIMM in the socket.

Step 0:

5.3.4 CF Card Installation

Note:

The NANO-9453 can support both CF Type I cards and CF Type II

cards. For the complete specifications of the supported CF cards

please refer to Chapter 2.

To install the a CF card (Type 1 or Type 2) onto the NANO-9453, please follow the steps

below:

Step 1:

Locate the CF card socket. Place the NANO-9453 on an anti-static pad with

the solder side facing up. Locate the CF card.

Step 2:

Align the CF card. Make sure the CF card is properly aligned with the CF

socket.

Step 3:

Insert the CF card. Gently insert the CF card into the socket making sure the

socket pins are properly inserted into the socket. See Figure 5-7.

Step 0: