Figure 5-4: cooling kit support bracket, Figure 5-5: connect the cooling fan cable – IEI Integration NANO-9453 v1.10 User Manual

Page 103

NANO-9453 EPIC Motherboard

Page 83

Figure 5-4: Cooling Kit Support Bracket

Step 4:

Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each

nut a few turns at a time and do not over-tighten the screws.

Step 5:

Connect the fan cable. Connect the cooling kit fan cable to the fan connector

on the motherboard. Carefully route the cable and avoid heat generating chips

and fan blades. See Figure 5-5.

Step 0:

Figure 5-5: Connect the cooling fan cable