6 dvi display device connection, Figure 4-15: vga connector, Figure 3-11 – IEI Integration KINO-PVN-D4251_D5251 User Manual

Page 69: Cn pinouts, See ta

KINO-PVN-D5251/D4251/ Mini ITX SBC

Page 55

Step 3:

Insert the VGA connector

Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

KINO-PVN-D5251/D4251. See Figure 4-15.

Figure 4-15: VGA Connector

Step 4:

Secure the connector. Secure the DB-15 VGA connector from the VGA

monitor to the external interface by tightening the two retention screws on either

side of the connector.

Step 0:

4.9.6 DVI Display Device Connection

The KINO-PVN-D5251/D4251 has a single female DVI-I connector on the external

peripheral interface panel. The DVI-I connector is connected to a digital display device. To

connect a digital display device to the KINO-PVN-D5251/D4251, please follow the

instructions below.

Step 1:

Locate the DVI-I connector. The location of the DVI-I connector is shown in

another chapter.