beautypg.com

2 single rs-232 cable with slot bracket, Figure 4-9: connect power cable to power supply – IEI Integration KINO-PVN-D4251_D5251 User Manual

Page 63

background image

KINO-PVN-D5251/D4251/ Mini ITX SBC

Page 49

Figure 4-9: Connect Power Cable to Power Supply

4.8.2 Single RS-232 Cable with Slot Bracket

The single RS-232 cable consists of one serial port connectors attached to a serial

communications cable that is then attached to a D-sub 9 male connector that is mounted

onto a bracket. To install the single RS-232 cable, please follow the steps below.

Step 1:

Locate the connector. The location of the RS-232 connector is shown in

Chapter 3.

Step 2:

Insert the cable connector. Insert the connector into the serial port box header.

See Figure 4-10. A key on the front of the cable connectors ensures the

connector can only be installed in one direction.

See also other documents in the category IEI Integration Hardware: