IEI Integration PX-10S-RS v1.01 - Manual (Page 6)

5
PX-10S User’s Manual
over the 3-pin header CN2. (A toggle switch is required over your SBC for this application.
Image. 4).
3.If you use ATX power supply, you may also plug a switch into pin-2 and pin-3 of CN2. In this
application, the 3-pin ATX power control cable is not required, and your ATX power supply will
then act as AT power supply (Image. 5).
Fan
CN33 and CN5 are fan connectors. Please refer to the pin assignment table for proper connection.
Image 3 Image 4
Image 1 Image 2
Image 5