IEI Integration PX-10S-RS v1.01 - Manual (Page 3)

2
PX-10S User’s Manual
PX-10S
ISA/PCI Bridge Backplane
Introduction
PX-10S is exactly the backplane what you want, even in the future. As you know, most of the
adapters are of PCI bus, and ISA adapters are on the decrease in the market. If this problem have
bothered you for a long time, then PX-10S is the right answer for you. In order to solve the problem,
PX-10S, includes 7 32-bit PCI slots (5V/3.3V) on board, gives the great flexibility for your
system’s extension. We have DC power outlet (including +5V, -5V, +12V, and -12V) on PX-10S to
keep system more stable. You can acquire a power supply with great stability, even as the system
work under heavy load. Besides, we also add a connector for ATX power supply to which you can
connect your SBC (SBC must have the ability to use ATX power).
Product Features
Standard
♦ PCI-conforms to PICMG 2.1 specification.
♦ ISA-conforms to IEEE P996 specification.
PCB
♦ The Printed Circuit Boards (PCB) overall dimension is 264.2mm x 221.6mm (10.4”x 8.8”) and
total thickness is 1.6mm (4 layers).
♦ Mounting holes are provided and are located to conform to the baby AT form factor. Mounting
holes are connected to Signal ground internally.
♦ Operating Temperature; 0 to 60°C (32 to 140°F).
♦ Storage Temperature; -20 to 85°C (-4 to 185°F).
♦ Humidity; 5% to 95%, non-condensing.
♦ EMI/Safety; Meets FCC, CE Class A and UL, CSA and TUV.
Connector
♦ Dual slots PCI/ISA for the CPU board.
♦ Two ISA slots for full-size ISA board.
♦ Seven 32-bit PCI slots for full-sized boards on the Primary bus, All slots are Master/Slave
configurable by using Bus Mastering Scheme.
♦ One AT standard power connector, 12 pins, 5A max, per pin for +5V,-5V, +12V, -12V voltages
and Ground.
♦ One ATX standard power connector; 20 pins, 5A max. per pin for +3.3V, +5V, +5VSB, -5V,
+12V, -12V voltages, Ground, and power Good signal.
♦ One ATX control connector to distribute signals coming from the CPU boards onto connector