Asante Technologies ASANT GIGANIC 1064SX - Manual (Page 22)

Page 4-16
Troubleshooting
When the tests finish, the test results are displayed in the Trou-
bleshooter window.
11 Verify the results to make sure that all tests passed.
▲ If a test fails, check that the adapter is seated properly in
a PCI slot or try installing the adapter in a different PCI
slot and run the tests again.
12 Click QUIT in the Troubleshooter window or select Quit from
the menu bar.
13 Open the Apple Menu and select Control Panels .
14 Select AppleTalk from the Control Panels submenu.
The AppleTalk control panel appears.
15 Open the Connect Via: drop-down menu and select the Ethernet
slot number where the adapter is installed.
16 Close the AppleTalk control panel.
17 Click Save to save changes.
Asanté Driver Local Statistics (ADLS) Program
To run the Asanté Driver Local Statistics (ADLS) program on your Power
Macintosh to display the configuration information on the adapter, follow
the procedure below.
➪ This software works with the 10, 10/100 and Asanté
GigaNIC PCI versions of Asanté PCI adapter cards (it is
provided for your convenience).
1 Double-click the Asanté ADLS for PCI icon to start the pro-
gram.
The ADLS window appears, displaying the following adapter con-
figuration information: driver version, PCI slot number, adapter
type, AppleTalk version, transmit status and receive status.
2 Verify the configuration information on the adapter.
3 Select Quit from the menu bar to close the ADLS program.