IEI Integration SPCIE-C2260-i2 - Manual (Page 83)

SPCIE-C2260-i2 PICMG 1.3 CPU Card
Page 66
Figure 4-20: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the on-board connector. Step 0:
4.6.3 VGA Monitor Connection
The SPCIE-C2260-i2 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the SPCIE-C2260-i2, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
SPCIE-C2260-i2. See Figure 4-21.