XLT XD-9004A - Manual (Page 59)

59
Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
NOTE: Most building codes require 500 Feet per Minute velocity. Exhaust duct is 1 ft
2
. Check
with your local building official for requirements.
Top Middle Bottom
187.5 187.5 93.75 93.75
[57.15] [57.15] [28.58] [28.58]
187.5 187.5 93.75 93.75
[57.15] [57.15] [28.58] [28.58]
189.75 241.5 155.25 181.125
[57.84] [73.61] [47.32] [55.21]
189.75 241.5 155.25 181.125
[57.84] [73.61] [47.32] [55.21]
187.5 187.5 93.75 93.75
[57.15] [57.15] [28.58] [28.58]
189.75 241.5 155.25 181.125
[57.84] [73.61] [47.32] [55.21]
287.25 365.625 235.125 274.3125
[87.55] [111.44] [71.67] [83.61]
189.75 241.5 155.25 181.125
[57.84] [73.61] [47.32] [55.21]
287.25 365.625 235.125 274.3125
[87.55] [111.44] [71.67] [83.61]
287.25 365.625 235.125 274.3125
[87.55] [111.44] [71.67] [83.61]
287.25 365.625 235.125 274.3125
[87.55] [111.44] [71.67] [83.61]
Single X
Double
X
Switches On
18xx 24xx 32xx 38xx
Exhaust Flow Rates VELOCITY (min. recommended)
X
Triple
X
X
X
X X
X X
X X
NOTE: Figures represent VELOCITY measured at the Grease Filter.
X X X
NOTE: All values are FPM [M/Min] unless otherwise noted.
X X
AVI RECOMMENDED EXHAUST FLOW RATES
The VELOCITY readings above are obtained by holding an anemometer 3” away from the Grease
Filter. Take several readings in different locations across the filters and average the results.