XLT XD-9004A - Manual (Page 31)

31
Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
OVEN CLEANING
If the oven is to be removed from its installed location for cleaning or servicing,
the following procedure is to be followed:
CAUTION
Fan Filter
Fan Guard/Filter
Holder
Your XLT oven is constructed of stainless steel. Most commercial cleaning agents may be
used safely on all stainless steel surfaces. Check application restrictions on product label prior to
usage. Observe recommended precautionary and safety measures as dictated by the product manu-
facturer. Do not use caustic cleaner on the conveyor bearings.
Do not use abrasive cleaners or abrasive pads as they can scratch stainless steel surfaces.
Areas with heavy buildup should be sprayed and allowed to soak for up to 5 minutes prior to wip-
ing clean. Always wipe with the “grain” of the surface to maintain appearance.
The most critical item to be cleaned is the filter on the fan. The filter is held in place by the
stainless steel fan guard/filter mount & can be washed several times. Regular cleaning of the filter
is important to maintain air circulation within the control box. Depending upon store conditions,
this filter should be cleaned weekly or as it gets clogged with dust. Please contact XLT Ovens for
replacement parts.
1. Shut off main manual gas valve.
2. Unplug electric cord.
3. Unplug gas line.
4. Unlock casters.
5. Disconnect restraint.
6. When servicing or cleaning is complete, move oven to original location.
7. Connect restraint.
8. Lock casters.
9. Plug in electric cord.
10. Plug in gas line.
11. Turn manual gas valve on.
12. Follow normal lighting instructions.
Oven must be cool and the electric cord unplugged before any cleaning or
maintenance is done.
WARNING