White’s Electronics TDI User Manual
Page 8
8 PulseScan TDI Owner’s Guide
Batteries and Charger
The PulsescanTDI uses a rechargeable Lithium Ion battery pack as the power
source. This type of battery can supply the high current levels required by the
detector and weights much less than other battery packs that have the same
power characteristics. It supplies a nominal voltage of 14.4 volts and approxi-
mately 500ma of current to the detector during operation.
The Smart Charger (Part Number 509-0040) used for recharging the Lithium Ion
batteries is supplied with the detector. It has two internal lights that indicate the
status of the charge cycle.
CHARGING SYSTEMS, BATTERIES AND BATTERY CONDITION -
ò
GREEN
RED YELLOW
т
т
OPERATIONAL RANGE
т
т
CAUTION - Low Battery
ò
TURN DETECTOR OFF,
AND RECHARGE
х
х
х