WARN 9 Series Hydraulic (3.0 cu in motor) - Manual (Page 2)

Maximum System Pressure: 2600 psi 179 BAR
Maximum Motor Pressure Drop: 2600 psi 179 BAR
Maximum Rated Input Flow: 15 GPM 57 LPM
WARN Industrial Winch
Motor / Contactor may be rotated in 180 degree increments. Clutch housing may be rotated in 72 degree increments.
outline drawing
Series 9-A-30
Hydraulic Winch
Manual Clutch
Pull from bottom of winch
Motor Type
Hydraulic
3.0 ci
(50 cc)
Units are given in inches [millimeters], unless otherwise specified
Pull from top of winch Pull from bottom of winch
Recommended Mounting- Always Observe Correct Drum Rotation Hydraulic System Specifications
Model
WARN INDUSTRIES, INC
Industrial Products
image
Notes: (1) Do Not Exceed 2600 psi motor pressure drop.
(2) Drum rotates clockwise with Port A pressurized when viewed
from gearbox end.
Feet down without angle brace
image
image
Angle Braces Only
Control Valve Type:
3-position, 4-way, closed
center, spring return
(cylinder spool)
Pull from top of winch
image Control Valve Schematic
Feet forward
Feet down with angle brace
image
schematic
912486.C1 2/2013
12900 S.E. Capps Road,
Clackamas, OR USA 97015
Customer Service (North America): 1.800.543.9276
Customer Service (International): 1.503.722.3008
FAX: 1.503.722.3000 www.warn.com
30279
Part Number
Feet down
image
Pull from top of winch
Feet forward
Pull from top of winch