WARN 30XL 82710 - Manual (Page 2)

Maximum System Pressure: 3000 psi 207 BAR
Maximum Motor Pressure Drop: 3000 psi 207 BAR
Maximum Rated Input Flow: 20 GPM 76 LPM
WARN Industrial Winch
Motor / Contactor may be rotated in 90 degree increments. Clutch housing may be rotated in 60 degree increments.
outline drawing
Series 30XL
Hydraulic Winch
Air Clutch
Pull from bottom of winch
Motor Type
WARN INDUSTRIES, INC
Industrial Products
image
Notes:
Solenoid Specification: 10-14VDC, 1.75-2.5 Amp. Winch must be
operated in the direction shown with Port B Pressurized. See Drum
Rotation on the front page. Do not power out in high speed mode.
Feet down without angle brace
image
2-Speed
Hydraulic
11.9 ci (195cc)
Units are given in inches [millimeters], unless otherwise specified
Pull from top of winch Pull from bottom of winch
image
987562.A2 9/2012
12900 S.E. Capps Road,
Clackamas, OR USA 97015
Customer Service (North America): 1.800.543.9276
Customer Service (International): 1.503.722.3008
FAX: 1.503.722.3000 www.warn.com
Recommended Mounting- Always Observe Correct Drum Rotation
Angle Braces Only
Control Valve Type:
3-position, 4-way, open
center, spring return
(motor spool)
Hydraulic System Specifications
Pull from top of winch
schematic
image Control Valve Schematic
Model
Feet forward
82710
Part Number
Feet down
image
Pull from top of winch
Feet forward
Pull from top of winch
Feet down with angle brace
image