WansView NCZ554MW - Manual (Page 14)

http://www.wansview.com
14

Search device：search and list cameras in LAN

Add device：Fill in IP address and port manually, and add it to device list.
 Open video：Click it to enter video play interface.
 Admin password： The factory default user of camera is admin, password
is 123456. In fig. 6 interface, many operations need to enter admin user. You can
also reset admin user and password by this button.
 Video encryption：If set video encryption before, it will pop up a dialogue
when open video, you must enter password to view video.
 Device property：Open this interface to set some parameters.
Due to device property has many setting items, so introduce the key content for you
as below.
5.2.1 Inquire device name and status
Fig. 10
In this interface, you can view EID, name, ip address and version of device etc, and can set
device name.