Vanguard DigiTMR S2 PC - Manual (Page 13)

REV 1 DIGITMR S2 PC USER’S MANUAL
10
f. The following confirmation screen will be displayed:
Click on the “Finish” button.
g. The DigiTMR S2 PC will now be displayed in the “My Bluetooth Places” window:
Note the port number listed under the device name. In the above case, the port number
is COM14. Follow the directions in section Error! Reference source not found. to
configure the VCBA S2 software to connect to the DigiTMR S2 PC using this COM port.