Aiwa HV-FX9000U - Manual (Page 21)

ENGLISH
3
Setting the VCR channels
Before Auto Channel Memory, this VCR can receive all
channels in your area by pressing the CHANNEL
i or k
button repeatedly. After Auto Channel Memory, you can skip
the channels which are not preset with the CHANNEL
i or
k button.
Before starting
• Set the VCR/CATV/DBS/TV selector to VCR.
• Make sure the VCR channel is not selected “LINE1” or
“LINE2”.
Press MENU.
Press i or k to select TUNING, then press
ENTER/DISPLAY.
Press i or k to select SOURCE SELECT, then
press j or l to display TUNER.
1
2
CLOCK
PROGRAM
TUNING
SETUP
SELECT ENTER
TO EXIT PRESS
ENTER
MENU
Press j or l to set AUTO CLOCK SET to ON.
The VCR automatically corrects the clock setting once
you set AUTO CLOCK SET to ON.
Press MENU to start the clock.
The normal screen returns.
To correct the digits while setting
Before pressing MENU in step 6, press i to select the item
you want to correct. Reset the digits using the j or l
button.
Tip
When the power supply is interrupted for more than 60 minutes
or the AC cord is disconnected from the AC wall outlet, the
clock setting is cleared. In this case, you have to set the clock
again.
Notes
• The date can be set from A.D.2000 to A.D.2099.
• AUTO CLOCK functions when
- the VCR’s power is turned off.
- the channel of a broadcaster that offers AUTO CLOCK
service is preset.
5
6
MENU
j / l
CHANNEL i / k
MONTH : JUNE
DAY : 17 SAT
YEAR : 2000
TIME : 10 : 30 AM
AUTO CLOCK SET : ON
AUTO CLOCK SET : ON
SELECT ADJUST
TO EXIT PRESS MENU
AUTO CHANNEL SET
TUNING BAND :
CH. ADD / DEL :
TV
CH.14 ADD
SOURCE SELECT : TUNER SOURCE SELECT : TUNER
SELECT ADJUST
TO EXIT PRESS MENU
12
VCR/CATV/
DBS/TV
ENTER/
DISPLAY
CONTINUE