Operation, Opera t ion – Alamo A72 User Manual
Page 103
OPERATION
A60/A72 01/08
Operation Section 4-17
©2008 Alamo Group Inc.
OPERA
T
ION
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety devices should be
inspected carefully at least daily for missing or broken components. Missing, broken,
or worn items must be replaced at once to reduce the possibility of injury or death
from thrown objects, entanglement, or blade contact.
(SGM-3)
•
Ensure the tailwheel beam position support
bolts are properly installed and tightened.
•
Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0039_B
•
Ensure the driveline slip clutch shield is in place
and in good condition.
•
Ensure the driveline integral shield is in good
condition and rotates freely
.
•
Make sure the tractor PTO master shield is in
place, lowered, and in good condition. OPS-R-
0039_A