Alliance Laundry Systems POCKET HARDMOUNT UW50P4 - Manual (Page 12)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
F232161 10
Table 1
NOTE: For further explanation of problem
indication displays, consult Test Procedure section
of this manual.
Display Interpretations
Display Meaning Display Meaning
DOOR Door not locked problem SK Soak
EMTY Empty problem S1 Supply #1 (Soap/Break)
FILL Fill problem S2 Supply #2 (Bleach)
SDLY Spin coast delay S3 Supply #3 (Softener/Sour)
NEXT Select cycle or open door or program S4 Supply #4 (as needed)
NOGO Cycle not available S5 Supply #5 (as needed)
STOP Stop key has been pressed or end of cycle TH Controlled Temperature Fill to High Level
01/4 One quarter hour (soak intervals) TL Controlled Temperature Fill to Low Level
A1 Buzzer or Auxiliary Output TO Controlled Temperature Overflow
CF Cold flush NO FILL Indicates machine cannot add heat due to low
level fill not being reached
CH Cold Fill to High Level W1 Wash #1 (Regular Reversing)
CL Cold Fill to Low Level W2 Wash #2 (Gentle Reversing)
CO Cold Fill to Overflow W3 Wash #3 (No Agitation)
CR Cold Rinse WF Warm Flush
CY Cycle Number WH Warm Fill to High Level
DR Drain WL Warm Fill to Low Level
F Heat select temperature (F--) in degrees F WO Warm Fill to Overflow
OH Auxiliary heat in minutes (no hours) WR Warm Rinse
HF Hot Flush • • • • • • Dots indicate water valves turned on
HH Hot Fill to High Level • Left dot – hot spray valve
HL Hot Fill to Low Level • 2nd dot from left – cold spray valve
HO Hot Fill to Overflow • 3rd dot from left – hot fill valve
HR Hot Rinse • 4th dot from left – cold fill valve
HS High Speed Spin • 5th dot from left – low level fill reached
HT Heat (steam or electric) • 6th dot from left – high level fill reached
M Minutes (used when programming time) PAUSE 5 Paused during Cycle (see explanation in this
manual)
MS Medium Speed Spin