Asus Motherboard P4V800-X - Manual (Page 74)

3-10 Chapter 3: Software support
3.3.6 Serial Number View
1. In the VIA RAID BIOS utility main menu, select Serial Number View then
press the key. The focus is directed to the list of channel used for IDE
RAID arrays. Move the selection bar on each item and the serial number is
displayed at the bottom of the screen. This option is useful for identifying same
model disks.
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master XXXXXXXXXX xxxxx xxx.xx Hdd
Serial_Ch1 Master XXXXXXXXXX xxxxx xxx.xx Hdd
VIA Tech. RAID BIOS Ver 1.xx
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
Create a RAID array with
the hard disk attached to
VIA IDE controller
F1 : View Array/Disk Status
, : Move to next item
Enter: Confirme the selection
ESC
: Exit
Serial Number: xxxxxxxx
3.3.5 Select Boot Array
1. In the VIA RAID BIOS utility main menu, select Select Boot Array then press
the key. The focus is directed to the list of channel used for IDE RAID
arrays.
2. Press the key to select a RAID array for boot. The Status of the
selected array will change to Boot. Press key to go return to menu
items. Follow the same procedure to deselect the the boot array.
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master XXXXXXXXXX xxxxx xxx.xx Hdd
Serial_Ch1 Master XXXXXXXXXX xxxxx xxx.xx Hdd
ESC : Exit