Acer Altos G520 series - Manual (Page 74)

3 Upgrading the system 64
Installing an expansion card
This section explains how to install an expansion card. The onboard
expansion slots support PCI (Peripheral Component Interconnect)
cards.
Note : The BIOS setup automatically detects and assigns resources
to the new device (applicable only to Plug-and-Play expansion
cards).
To install an expansion card
Note: The illustrations used in this section show the Altos G520
server chassis.
1 Observe the ESD precautions and pre-installation procedures
described on page 37.
2 Locate an empty expansion slot on the mainboard.
3 With your finger, open the expansion card slot lock on the rear
panel (1).
4 Pull out the card bracket (2).
5 Remove the expansion card from its protective packaging.
BB!H631!.!FO/cppl!!Qbhf!75!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN