System connections, Caution, Inputs – Staub Electronics EA-AMP-SUB-1D-110 EPISODE - DIGITAL SUBWOOFER AMP 110 WATT W_ 12V TRIGGER User Manual

Page 5: Speaker outputs

EA-AMP-SUB-1D-110 Installation and Users Manual

pg.5

SYSTEM CONNECTIONS

CAUTION:

All connections and switching must be done with the amplifier’s power switch positioned to ‘Off’ (LED will be

RED). Connect the power cord last to be sure that the amplifier is off during all of your connections and set up.

INPUTS

For line level connections, use high-quality RCA cables that feature low impedance, shielding and high-quality connectors.

SPEAKER OUTPUTS

Use 14-18 gauge stranded two-conductor loudspeaker wire for all high level connections. At each loudspeaker-level connection, ensure

that at least 2 inches of each conductor are separated. Strip away 1/4 inch of insulation from each conductor. Connect the appropriate

conductor to each screw terminal, observing correct polarity.

EA-AMP-SUB-1D-110

AV Receiver

SUB

CEN

Switched

Outlet

+ 12V Trigger

Out

LeŌ & Right

Preamp Out

LFE Sub Out

Engineered in the USA
Manufactured in China