SR Products ETL121375 Nominal Temperature Rating - Manual (Page 4)

ETL Storage
The ETL should be stored in indoor or sheltered dry areas where the ambient temperature should not exceed
150F. The ETL should remain in its box while in storage to prevent it from accidental actuation in extreme
induction fields.
ETL Inspection, Maintenance, and Replacement
The ETL should be installed inspected and replaced in accordance with the applicable codes and authorities
having jurisdiction. Since this multipurpose life safety device can be installed in many fire and life safety
applications, the most stringent code requirement that governs the intended application must be in compliance.
SR Products, LLC recommend that the ETL links be inspected and examined at least once every year (or more
often in extreme environments) for corrosion, soldered joint cracks, paint residue, chemical residue, or other
foreign material that would impair the performance of the ETL Link. In such cases, the ETL should be
replaced.
Manufactured By:
SR PRODUCTS, LLC, 1109 WEST CEDAR ST., STANDISH MI 48658
Web: www.srproducts.com Phone: 888-667-0850 Email: [email protected]
ETL375F
Rev. D
2/24/12
Page 4 of 4