Southern Folger 10120AM MOTOR OPERATED ELECTRO-MECHANICAL DEADLATCH - Manual (Page 2)

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211 Revised 3/09
10120AM MOTOR OPERATED
ELECTRO-MECHANICAL DEADLATCH
STANDARD FEATURES:
• Deadlock indication switch
• Mechanical latchback
• Strike with security fasteners
• Mogul cylinder (US26D Finish)
• Plug connector
• High torque motor
• Fail secure
• Mounting fasteners
OPTIONAL FEATURES:
HALF CYCLE HOLDBACK - Remote
two-position maintained contact switch
is required for this function. Latchbolt is
retracted electrically when switch is in
open position. When remote switch is
returned to locked position, latchbolt
will extend when door is opened
approximately 2". UL Listing for fire door
not available with this function. Specify “D.”
NO LATCHBACK - Allows latchbolt to
extend without opening door. Normally
used with “D” function. Specify “NL.”
KNOB FUNCTION - Bolt retracted by
knob on opposite side of mogul cylinder
only. Specify “K.”
MECHANICAL KEY HOLDBACK - Bolt
retracted by key, remains retracted until
manually projected with key. UL Listing for
fire door not available with this function.
Specify “MKH.”
LOCAL ELECTRIC KEYSWITCH - Day
key provides local electric operation and
may be disabled from remote control
point. Master key provides both electric
and mechanical operation. Specify “LEK.”
NOTE: Master keying available.
KEY CYLINDER EXTENDER - An option
in place of providing a recess in the frame
when keying on the stop side is required.
Available in 3" or 5". 3” extender can be
used on openings up to 6” jamb.
5” extender can be used on openings up
to 8” jamb. Specify “KCE,” then
extender size. Other lengths available
upon request.
PROVIDE:(See Fig.1)
1. Dimension “A” (overall frame width)
2. Dimension “B” (edge of frame to center
line of lockbolt)
24 VDC MOTOR - Specify “24 VDC.”
TECHNICAL DATA:
• STANDARD FINISH:
Galvanized
• COVER: 10 gauge steel plate
• CASE: 10 gauge steel plate
• STRIKE: Stainless steel
• LATCHBOLT: Stainless steel
• DEADLOCK ACTUATOR:
Stainless steel
• MOGUL CYLINDER:
US26D
• MOGUL KEYS:
Nickel Silver
• PIN TUMBLERS:
Combination nickel silver
and stainless steel,
6 tumblers per lock
• ELECTRICAL: 115 VAC,
1 phase, 60 Hz., 2.4 amp
inrush, 1.8 amp running,
24 VDC (Optional) 3.3 amp
maximum
• LOCK SIZE:
12" H x 5-7/16" W x 3-1/2" D
• LOCK WEIGHT: 19 lbs.
• LATCHBOLT SIZE:
1-1/2" x 3/4"
• LATCHBOLT THROW: 1"
• UL Listed for use on three-
hour fire doors.
• UL Listed as burglary resistant.
• ASTM F 1577 Certified
Impact Test-Grade1.
(115VAC and 24 VDC motor)
Door Preparation
Frame Preparation
NOTE: Drawing for illustration only. Reference template
for specific Information.
Swing Chart: Specify circled swing number when ordering.
* Indicates both mounting /access plate side.
E L E C T R I C L O C K S
JAMB MOUNTED FOR
SWINGING DOORS
Medium and maximum security.
B12
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 22