Southern Folger 51P DEADLATCH - Manual (Page 2)

B10 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
Optional Features________
s Bolt projection – Standard 1/4" when
retracted 3/4" bolt throw. Consult
factory for other projections.
s No-notch feature – The holdback
lever has no notch to hold the
latchbolt mechanically retracted. The
latchbolt extends in the locked
position regardless of the position of
the door.
s Interlocking – Accomplished through
the control console.
s Manual air release system – Allows
for the manual release of doors or
groups of doors from a remote
location. Latchbolt remains retracted
until system is manually reset. Specify
MARS.
Specifications_________
s Case and cover – 7 gauge steel.
s Latchbolt – Solid steel, with
hardened steel roller pins.
s Deadlock actuator – Zinc plated
steel, roller-type.
s Lever tumblers – spring-temper
brass, activated by heavy
phosphor-bronze springs.
s Key cylinder – One-piece,
bronze alloy with paracentric
keyway.
s Bolt size – 2" x 3/4".
s Bolt throw – 3/4"
Electrical
Characteristics________
s Pneumatic solenoid voltage –
24VDC with 5.4 watts power
consumption; 2.4 watts on MARS
option.
s Indication switch – SPDT, UL
Listed.
Dimensional Data_______
Note: Dimensions are for information
and planning purposes only and should
not be used as templates.
FOLGER ADAM PNEUMATIC LOCKS Key: Prison Paracentric
Door: Swinging
Security
Level:
Maximum
51P DEADLATCH
OPERATION KEYING
WITH INDICATION
SWITCH
MARS
Standard (1)
One Side 52PL Available
Two Sides 56PL Available
No-Notch (2)
One Side 52PLNN Available
Two Sides 56PLNN Available
How to Specify________________________________________
NOTE: The above are standard 5-tumbler models. To specify 6-tumbler units, add 6 after the basic
model number. Example: 52P-6-LL.