Southern Folger NS400P PNEUMATIC DEADLATCHES - Manual (Page 2)

B6 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
Optional Features________
s Manual air release system – Allows
for the manual release of door or
groups of doors from a remote
location. Doors remain unlocked until
system is manually reset. Specify
MARS.
s Builders hardware key cylinders –
High security six-pin tumbler cylinder
may be specified. Special keying
requests will be accommodated,
if possible.
NOTE: Customer-supplied key cylinders may
be used to adapt NS400 Series locks to a
specific keying system. These cylinders must
have:
a) 1-5/32" diameter, full bar stock
bodies.
b) 1-1/8" length, including cam.
c) Standard, removable Yale-type cam.
Cylinders and all keys should be sent to
Southern Folger Detention Equipment
Company. Required with LEK feature and
cylinder extensions.
Customer is responsible for supplying the
appropriate spacer ring(s). Any variations
from removable, Yale-type cam require special
pricing.
s Local electric key (LEK) – Inmate key
operates lock electrically, staff keys
always operate the lock manually, and
can operate it electrically. Feature is
enabled or canceled from a remote
control console.
s Inmate push button – Allows
operation of the lock from inside the
room or cell, may be canceled from
central control console. A double-pole,
double-throw switch is available for
additional functions.
s Key cylinder extension – Required
when lock is keyed on the stop side
of the door frame. Five standard
lengths are offered:
Jamb Cylinder
Size Extension
4-1/2" – 5" 4-3/4"
5" – 6" 5-3/4"
6" – 7" 6-3/4"
7" – 8" 7-3/4"
8" – 9" 8-3/4"
NOTE: Please specify appropriate cylinder
extension length when ordering. Special
lengths may be provided for other jamb
thicknesses. Please contact factory for pricing
and availability.
s Finish – Key Cylinder: US26D.
Dimensional Data_______
Note: Dimensions are for information
and planning purposes only, and should
not be used as templates.
Specifications_________
s Lock case – Investment-cast
stainless steel.
s Latchbolt – Investment-cast
stainless steel, hardened.
s Latchbolt throw – 3/4".
s Operating lever – Stainless steel.
s Deadbolt lever/trigger bolt –
Investment-cast stainless steel.
s Strike – Stainless steel stamping,
angled lip.
Electrical
Characteristics________
s Pneumatic solenoid voltage –
24VDC with 1.5 watts power,
consumption, self -return type.
s Indication switch – SPDT,
UL listed.
s Rating – 5 amp @ 125 or
250 VAC.
FOLGER ADAM PNEUMATIC LOCKS Key: Builders Hardware
Door: Swinging
Security
Level: Minimum/Medium
NS400P PNEUMATIC
DEADLATCHES
MODEL NO.
OPERATION
DESCRIPTION
INDICATION
SWITCH
LATCHBACK
LEK
OPTION
MARS
WITH WITHOUT
NS400P-01 1 X X Available Available
NS400P-04 2 X X Available Available
Feature/Option Chart_________________________________