Southern Folger 120MC HALF-CYCLE DEADLATCH - Manual (Page 2)

A18 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
FOLGER ADAM ELECTRIC LOCKS Key: Mogul
Door: Swinging
Security
Level: Medium/Maximum
120MC HALF-CYCLE
DEADLATCH
Optional Features________
s Faceplate – US32D finish.
s Indication/auxiliary switches – An
indication switch monitors the deadlock
lever indicating a deadlocked latchbolt.
The auxiliary switch monitors the
latchbolt for extended or retracted
position.
s Local electric key (LEK) – A unique
function which uses two types of keys
for applications where inmates carry
their own keys, but supervision is
necessary. One key turns in one
direction only and operates the lock
electrically. The supervisory key turns in
both directions to operate the lock
electrically or mechanically. The electric
operation may be cancelled from a
central console or control point at any
time via a three-position switch.
The Maxi-Mogul ® key cylinder is
uniquely suited for this high frequency
operation, shown by cycle test of
1,000,000 operations.
LEK not available on any 120MC-3
Series Locks.
s Key Cylinder Extension – When the
lock is keyed on the stop side of the
jamb, an extension eliminates the need
for a special, recessed frame pocket.
s Optional motor voltage – 24 VAC or
24 VDC.
Dimensional Data________
Note: Dimensions are for information and
planning purposes only, and should not
be used as templates.
The chart at right shows applicability of
above options to all 120MC Models.
For complete details, see How to
Specify in this section.
Specifications_________
s Case and cover – 10 gauge steel.
s Latchbolt – Investment-cast
stainless steel, hardened, 1" throw.
s Deadlock lever – Stainless steel,
adjustable for door gap variations.
s Bolt opening – Does not allow
access to mechanism.
s Roller bolt – Investment-cast
stainless steel with stainless steel
roller.
s Operating lever – Stainless steel to
operate with motor.
s Strike – Investment-cast stainless
steel, attached with screws in two
directions.
s Motor – 120 VAC continuous duty,
24 VAC or 24 VDC optional,
synchronous-type gearmotor.
s Springs – Stainless Steel.
Electrical
Characteristics________
s AC motors – Synchronous-type
gearmotor with brake.
Ratings:
120 VAC: 60 Hz, 1.3 amps at full
load.
s DC motors – Permanent-magnet
gearmotor.
Ratings: 24 VDC, 2.2 amps at full
load.
s Switches – SPDT, UL Listed, 15
amps @ 125 or 250 VAC.
MODEL NO. OPERATION
LATCHBACK RELOCK
SWITCH INDICATION SWITCHES LEK
AVAILABLE
WITH W/O DEADLATCH AUX
120MC-1-01 Standard (1) X X Yes
120MC-1-04 Standard (1a) X X Yes
120MC-1-09 Standard (1b) X X X Yes
120MC-2-01 Knob Release (2) X X Yes
120MC-2-04 Knob Release (2) X X Yes
120MC-2-09 Knob Release (2) X X X Yes
120MC-3-01 Key Holdback (3) X X No
120MC-3-04 Key Holdback (3) X X No
120MC-3-09 Key Holdback (3) X X X No