Southern Folger NS400E SOLENOID-OPERATED DEADLATCHES - Manual (Page 2)

A26 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
s Holdback switch (Models
NS400EFS, NS400E with electrical
holdback) – Maintains electrical
holdback. Requires a relay in the
central control console.
s Finish – US32D satin stainless steel.
s Indication switch – An internal switch
to monitor the positions of the
deadlock actuator. Signals deadlocked
condition.
Optional Features_______
s Builders hardware cylinders – High
security six-pin tumbler cylinder may
be specified. Special keying requests
will be accommodated, if possible.
NOTE: Customer-supplied key cylinders may be
used to adapt NS400 Series locks to a specific
keying system. These cylinders must have:
a) 1-5/32" diameter, full bar stock bodies.
b) 1-1/8" length, including cam.
c) Standard, removable Yale-type cam.
Cylinders and all keys should be sent to Southern
Folger Detention Equipment Company and are
required with cylinder extenders.
s Local electric key (LEK) – Inmate key
operates lock electrically. Staff keys
always operate the lock manually and
can operate it electrically. Feature is
enabled or canceled from a remote
control console.
NOTE: When key cylinders for LEK are supplied
by customer, contact factory before ordering or
sending cylinders.
s Inmate push button – Allows
operation of the lock from inside the
room or cell. May be canceled from
central control console. A double-pole,
double-throw switch is available for
additional functions.
s Key cylinder extension – Required
when lock is keyed on the stop side of
the door frame. Five standard lengths
are offered:
Jamb Cylinder
Size Extension
4-1/2" – 5" 4-3/4"
5" – 6" 5-3/4"
6" – 7" 6-3/4"
7" – 8" 7-3/4"
8" – 9" 8-3/4"
NOTE: Please specify appropriate cylinder
extension length when ordering. Special lengths
may be provided for other jamb thicknesses.
Contact factory for pricing and availability.
s Finish – Key Cylinder: US26D
Specifications_________
s Lock case – Investment-cast
stainless steel.
s Latchbolt – Investment-cast
stainless steel hardened.
s Latchbolt throw – 3/4"
s Operating lever – Stainless steel.
s Deadbolt lever/trigger bolt –
Investment-cast stainless steel.
s Strike – Stainless steel stamping,
angled lip.
Electrical
Characteristics________
s Solenoid – Tubular, continuous-
duty power modulator.
s Voltage – 24 VAC or DC, 3.3
amps, 82 watts inrush; .25 amps
6 watts seated.
s Indication switch – SPDT,
UL listed.
s Switch rating – 5 amp @ 125
or 250 VAC.
Dimensional Data________
Note: Dimensions are for information
and planning purposes only, and should
not be used as templates.
For complete details, see How to
Specify in this section.
FOLGER ADAM ELECTRIC LOCKS Key: Builders Hardware
Door: Swinging
Security
Level: Minimum/Medium
NS400E
SOLENOID-OPERATED DEADLATCHES
MODEL OPERATION
INDICATION
SWITCH
LATCHBACK OPERATIONAL
SWITCH
HOLDBACK
LEK
OPTION
CONTINUOUS
DUTY
MODULATOR WITH WITHOUT ELECTRIC
NS400E-01 1
• •
Available Standard
NS400E-04 2
• •
Available Standard
NS400E-07 3
• • •
Available Standard
NS400EFS-04 1
• • •
Available Standard
Feature/Option Chart