Luxor|H.Wilson WT42M-N - Manual

www.luxorfurn.com
www.hwilson.com
05/14/13
Parts List
Flat Panel Desktop Mount Instructions
Tighten with
allen wrench G
(Optional)
Mounting Surface
Self Install Instructions:
For plastic ribbed shelf drill into sections
where the cross ribs intersect. For other
surfaces make sure there is 3˝ x 12˝ of
clearance for the mounting plate.
WARNING: Please follow the cautionary
guidelines included with your drill.
1
2
A x1
B x1
D x1 E x4
M4x12
4mm
5mm
M4x20 M5x12 M5x20
J x4 K x4 L x4 N x4
C x1 F x1
H x1
G x1
Bottom of Luxor Top Shelf Bottom of H.Wilson Top Shelf
3/8˝ or 9mm Drill Bit x1
F
C
D
A
A
G
B
B
A
B
Tools Required
- Phillips Screwdriver
- 13mm Socket Wrench
- Drill + 3/8˝ or 9mm Drill Bit (Not re-
quired on units with pre-drilled hole)
Leave some
slack on the cable.
Tighten with a
Phillips Screwdriver
Tighten with
allen wrench H
Tighten with 13mm
Socket Wrench
Monitor
(Not Included)
3
Insert spacers E on
screens with counter
sunk hole patterns
J, K, L, N
E
B
B
H