Luxor|H.Wilson WPTV50 - Manual

4
5
6
2 1
3
H. Wilson Company
2245 Delany Road
Waukegan, IL 60085
Phone (800) 245-7224
Fax (800) 245-8224
WPTV50E
Mobile Plasma Mount
Parts List:
A. (1) Top shelf with handle & 4 bosses
B. (1) Middle shelf with 8 leg bosses
C. (1) Bottom Shelf with caster inserts
and four bosses
D. (8) Fluted Legs w/channels
E. (2) 4” Swivel casters with brake
F. (2) 4” swivel casters
G. (2) Cabinet Packs
H. (1) Base Plate
I. (1) WFST Mount
J. (2) Chrome Tubes
K. (4) 3/8 x 1" Bolt
L. (4) 3/8" Washer
M. (4) 3/8" Nut
N. (1) Upper Bracket
O. (4) 5/16" Bolt
P. (4) 5/16" Washer
Q. (4) 5/16" Nut
R. (4) Small Bolt
S. Black shelf inlay
Rubber Mallet Optional: metal hammer with
block of wood to cushion impact.
Required Tools
(not included)
2. Turn shelf so casters are on the floor.Place
161/2" fluted legs onto leg bosses. Press fit
as much as possible with hands. Seat firmly
with rubber mallet.
Step 3: Locate back panel and slide down
into grooves of the 2 back legs (same side as
electrical bracket on top shelf. Take the two
side panels, slide into place. Take front panel
and slide into place positioned so that the
lock will be on the left.
1. Insert casters into caster sockets,
making sure that you have the two
locking casters in the caster sockets
on the 18" long side of the cart that
has the handle.
Bottom Shelf
(1) Electrical Assembly if 'E' model
was purchased
Step 4: Place middle shelf (B) leg
bosses into lower fluted legs and press
until leg bosses are all the way in (tap
gently with mallet if necessary.
Step 5: Place the base plate (H) onto
the middle shelf (B) (with the welded
tubes at the back of the cabinet). Open
cabinet doors. Secure base to shelf with
4 Bolts (K), Washers (L) and Nuts (M).
Step 6: Repeat fluted leg steps.
K
H
B
L
M
C
G
C
D D