Tv/monitor connections, Tv/monitor connections …………………………… 22, Ch at pe r 2 - c on ne ct io ns – Adcom GFR-700HD User Manual

Page 22: Gfr-700hd owner’s manual, Component video out video/ s-video out hdmi out

r 2 - C

GFR-700HD Owner’s Manual

TV/Monitor Connections

There are four ways to connect the GFR-700HD to a

TV, monitor, or other display device:

• Composite Video

• S-Video

• Component/Progressive Scan Video

• HDMI

Composite Video Connections

1 Using a video cable, connect the Monitor output

on the GFR-700HD to the video input on your dis-

play device.

S-Video Connections

1 For higher quality video, use an S-video cable to

connect the Monitor output on the GFR-700HD to

the S-video input on your display device.

Component Video Connections

1 Using a Component video cable, connect the Y/

Pb/Pr outputs on the GFR-700HD to the corre-

sponding Y/Pb/Pr inputs on your digital display

device.

2 Be sure to match the red, green, and blue con-

nectors accordingly.

HDMI Connections

1 Using an HDMI cable, connect the HDMI output

on the GFR-700HD to the corresponding HDMI in-

put on your digital display device.

2 The built-in HDMI switcher/scaler allows you to

view both HDMI source components and upcon-

verted legacy sources (composite, S-video, and

Component video) on your digital display de-

vice.

��

��

��

��

�

��

��
��
��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

�

��

�

��

��

��

��

��

��

�

��

��

• The OSD is always available

on the Composite and S-video

outputs.

• The OSD is always available on

the Component video out-

puts, EXCEPT when the input

signal is higher than standard

(NTSC/PAL) resolution. If so,

the GFR-700HD switches from

standard to bypass mode and

the OSD will not appear. How-

ever, you can still access the

Setup menus by pressing the

Setup button (which causes the

GFR-700HD to switch back to

standard mode).

Component

Video Out

Video/

S-Video Out

HDMI

Out

VIDEO 1

DOLBY D

COAXIAL 1

-40.0 dB

On-Screen Display (OSD) Notes: