Luxor|H.Wilson ST-3 - Manual

www.luxorfurn.com
www.hwilson.com
03/15/13
Parts List Tools Required
- 1 ⁄
2
˝ or 13mm Wrench
3 Shelf Stainless Steel Cart Instructions
Place the cart on a level surface and tighten
all of the hardware using the Allen wrench
and a 1 ⁄
2
˝ or 13mm Wrench.
Thread the adjustment nut K on casters H & J until tight.
Push the plastic bumper G onto frame A, and thread the
casters H & J to frame A. Secure with Wrench.
Using Allen wrench F and a 1 ⁄
2
˝ or 13mm Wrench,
attach the top shelf to the tube frames with 4 screws
C, 4 corner brackets D and 4 locking nuts E.
Repeat Step 1 for the Middle
and Bottom shelves
1
3
2
4
F x1 E x12 D x12 C x12
A x2 B x3 G x4 H x2 J x2 K x4
A
A
A
G
K
H/J
A
A
B B
B
F
C
D
E