LevelOne VOI-7100 - Manual (Page 35)

30
Bridge When setting to Bridge Mode, the WAN
and the LAN ports will be bridged.
IP Type There are three selections for Bridge:
Fixed IP, DHCP Client, and PPPoE
modes.
For Fix IP Mode, please make sure the IP
address. Net Mask, Gateway, and DNS
settings are suitable in your current
network environment.
For PPPoE Mode, you have to enter
correct username and password to get the
IP address from your Internet Service
Provider.
NAT Settings
This embedded NAT is useful for ADSL users without NAT router, and it
separates the WAN port from the LAN port to perform router IP address
translation. Connect your PC to the LAN port, set your PC as DHCP Client
mode, and then the PC will get an IP address from the IP Phone automatically.