LevelOne WAP-6101 - Manual (Page 13)

Configuration (Press 13
sec)
seconds and release it.
2. The Slave AP will be marked as an
un-configured device, so that it can be paired
with another Master or configured Slave AP
later.
For Master AP, there is no effect on this button
behavior.
Reset to Default
WEC/Reset
(Press 20
sec)
1. Press the Reset/WEC button for about 20
seconds till the Status LED becomes solid
Green to indicate that the reset to default
function is triggered. Release the button.
2. Then, the device will reboot automatically and
apply the factory default settings as well.
It takes about 2 minutes to finish the reset to factory
default operation.