LevelOne MSL-3S79 - Manual (Page 43)

37
6. Click Apply .
VLAN Table Configuration - Edit interface
65B
6.6.2 Rapid Spanning Tree
The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree
Protocol and provides for faster spanning tree convergence after a topology change.
The system also supports STP and the system will auto detect the connected device
that is running STP or RSTP protocol.
90B
6.6.2.1 STP System Configuration
User can view spanning tree information about the Root Bridge
User can modify RSTP state. After modification, click Apply button
Mode: user must enable or disable RSTP function before configure the
related parameters
Priority (0-61440): a value used to identify the root bridge. The bridge with
the lowest value has the highest priority and is selected as the root.
Max Age (6-40): the number of seconds a bridge waits without receiving